J Chromatogr A, 1669, 462942 (2022). Samples were medroxyprogesterone acetate (MPA) as standards and commercial drug extracts, dissolved in dichloromethane. TLC on silica gel (preactivated by 30 min heating at 120 °C) with dichloromethane – ethyl acetate 10:1, followed by 30 min drying at 120 °C. Derivatization by spraying with sulfuric acid (50 % in ethanol). Visualization in a 3D-printed chamber designed especially for this purpose, blocking extraneous light and including a smartphone holder, a fluorescent lamp and an optical density step tablet. Pictures were taken with the smartphone digital camera, after spraying (6 background images) and after 10 min heating at 120 °C (6 foreground images). In the last case, MPA appeared as black spots (hRF 16–20). Using an image processing software program: (1) one averaged background image and one averaged foreground image were created by concatenation and were split into 3 colour channels; (2) the green colour channels were corrected to remove background noise, by subtraction of an averaged darkfield image (taken on blank plate without light) and by comparison ratio to an averaged blankfield image (taken on blank plate with light); (3) the pixel values of the MPA bands were converted to optical density values through the Robard’s function, by comparison to a reference image of a theoretical optical density step tablet; (4)  furthermore, the corrected background image was subtracted from the corrected (and denoised with a Gaussian Blur) foreground image; a triangle threshold algorithm was applied on the resulting image, and was converted to a mask (white spots on black background); (5) applying the binary mask to the original corrected images (obtained in (2)), the final integrated density values of MPA spots were obtained. This method was validated for linearity range (1.25–3.75 mg/mL), for precision, for reproducibility, for robustness, and for accuracy expressed as average recovery values (101 % overall mean) by comparison of TLC results with HPLC-DAD results.

J Chromatogr A 1638, 461830 (2021). The purpose was to find the first universal HPTLC mixture (UHM), a mixture of reference compounds that could be used for the system suitability test (SST) for the full RF range in all HPTLC experiments.
(Part 1) UHM composition: First, 56 organic molecules, detectable without derivatization, were tested on HPTLC silica gel with 20 different mobile phases (MP) belonging to different Snyder’s selectivity groups and with several polarity indices. Visualization under UV 254 nm and 366 nm. Densitometry scanning at 254 nm in absorption mode, and at 366 nm in a fluorescence mode (mercury lamp 366 nm, with wavelength filter <400 nm). For selected bands, spectra were recorded in absorbance-reflectance mode (wavelength range 190 – 450 nm, deuterium and tungsten lamp). This procedure allowed 8 molecules to be selected for their better spot resolution and for their specific RF values (at least 3 different values distributed throughout the full RF range for each MP). The final composition of UHM was: thioxanthen-9-one (0.001 %), guanosine (0.05 %), phthalimide (0.2 %), 9-hydroxyfluorene, octrizole, paracetamol, sulisobenzone and thymidine (each 0.1 %), in methanol.
(Part 2) UHM validation: Afterwards, UHM was submitted again to a panel of HPTLC assays with always two MP: (A) toluene – methanol – diethylamine 8:1:1; (B) ethyl acetate – formic acid – water 15:1:1; and for each MP, the means, standard deviation and 95 % confidence intervals of the RF values were calculated. (a) UHM was validated for intermediate intra-laboratory precision, as well as for inter-laboratory reproducibility, with ΔRF 0.045. (b) The capacity of UHM to detect small variations was demonstrated by significant changes in at least some RF values, when separation was deliberately performed at different levels of relative humidity (0 %, 33 %, 75 %, 100 %), or with smaller humidity variations (7 % compared to 0–5 %, and 49 % compared to 33 %), or when performing vs. omitting the 10min chamber pre-saturation, or when modifying the MP (+/-10% of one solvent at each time). These response characteristics (the opposite of robustness) made UHM a powerful tool for SST. (c) Finally, UHM stability was studied with UHM aliquots under several storage conditions (-78 °C, -20 °C, 4 °C, room temperature, 45 °C; or 40 °C with 75 % relative humidity) and durations (2 weeks or 2 months). The densitometric peak profiles at 254 nm were compared to those of the fresh compounds, qualitatively (RF value, UV spectrum) and quantitatively (peak area). UHM was stable at room temperature or below, for 2 months (at higher temperature, guanosine, phthalimide and paracetamol degraded).

J Chromatogr A 1638, 461895 (2021). Samples were sphingolipid-rich fractions of unproteinated blood plasma from healthy humans or from Fabry’s disease patients, as well as standards of sphingomyelin (SM) and of globotriaosylceramides (Gb3 = ceramide trihexosides), and related compounds (lyso-ceramide trihexosides, lactosyl ceramide, glucosyl ceramide). HPTLC on silica gel (Lichrosphere with spherical particles) by automated multiple development with a 9-step gradient, starting with pure methanol and ending with dichloromethane – methanol 9:1. Visualization and densitometry under UV 190 nm. Derivatization for Gb3 and derivatives (but not for SM) by immersion into orcinol solution (0.2 %, with sulfuric acid 10 %), followed by 15 min heating at 100 °C and by densitometry under visible light 550 nm. Bands of interest were directly eluted with methanol from underivatized plates into an ion-trap MS, through the oval head of a TLC-MS interface (with stainless steel frit to remove silica gel particles). Two different ionization processes were used: (A) electrospray ionization (ESI, capillary voltage 4 kV, endplate offset voltage -0.5 kV, nebulizer pressure 40 psi, drying gas 9 mL/min at 350 °C); (B) atmospheric pressure chemical ionization (APCI, capillary voltage 2–3 kV, current intensity 4.5 µA, nebulizer pressure 45 psi, drying gas 5 mL/min at 350 °C; vaporization at 450 °C). Full MS spectra were recorded up to m/z 1500 in positive ion mode. The relative ion intensities were used to quantify the detected species. Previous to this study, the precision of the elution head positioning was tested on Gb3 standard zones, comparing 3 positions for analyte elution: from the centre and from each higher or lower side of the band. The same main m/z peaks were observed in the 3 positions, but in different proportions. This was explained by the presence of coeluting Gb3 subclasses (the ceramide moiety CM being either saturated, mono-unsaturated fatty acyl with a slightly higher migration distance, or polar hydroxyl fatty acyl with the opposite effect on migration) and of coeluting Gb3 isoforms (the hexoside moiety consisting of glucose and/or galactose units). This resulted in the broadening and partial splitting of the standard band. In the plasma samples, 19 molecular species of Gb3 were identified (depending on the CM, the sugar isoforms being undistinguishable by MS): 5 with a saturated CM, 7 with two additional double bonds on the CM, 7 with a methylated CM. In case of Fabry’s disease, most Gb3 species with saturated CM were highly increased, whereas other species were decreased.

J Chromatogr A 1638, 461597 (2021). Samples were Isatis tinctoria (= I. indigotica) root extracts (Brassicaceae) and their fractions. Standards were oseltamivir acid (OA), a neuraminidase (NA) inhibitor; pinoresinol (PR, a lignan), β-sitosterol (SS, a sterol), and dihydro-neoascorbigen (DHNA, an alkaloid). HPTLC / TLC on silica gel with (1) petroleum ether – ethyl acetate – acetic acid 48:8:1 for petroleum ether extracts and SS, or 30:40:1 for ethyl acetate extracts, or 10:30:1 for PR; (2) with toluene – ethyl acetate – methanol – formic acid 16:3:1:2 or 10:4:1:2 also for ethyl acetate extracts and DHNA; (3) with n-butanol – acetic acid – water 25:4:3 for butanol extracts. OA was applied but not developed. RP-18, polyamide, cellulose, alumina layers were tested, but the resolution was lower. Derivatization by spraying with sulfuric acid (10 % in ethanol). Enzymatic assay by immersion of the plates into neuraminidase solution (6 U/mL), followed by 1 h incubation at 37 °C and by immersion into chromogenic substrate solution (1.75 mM 5-bromo-4-chloro-3-indolyl-α-D-N-acetylneuraminic acid). After 5 min, NA inhibitors were seen as white zones on blue background. The experiment was previously improved for the following parameters: incubation times, substrate and enzyme concentrations, followed by statistical evaluation and calculations using Box-Behnken design. Quantification by absorbance measurement (detection wavelength 605 nm, reference wavelength 420 nm). In optimal conditions, OA had LOD 300 ng/zone. Zones of interest on underivatized plates were directly submitted to MS, using EFISI (electrostatic-field-induced spray ionisation), as follows. Chromatograms were immersed 1–3 s into dimethicone – n-hexane 1:1 to form a hydrophobic film, and dried 30 min at room temperature; on the analyte spot, a hydrophilic droplet was formed with 5 µL methanol – water 1:1, extracting the analyte from the layer; the analyte was further attracted through a capillary tube (3–4 cm long, made of non-deactivated fused silica) under a strong electrostatic field, into the in-let orifice of the triple-quadrupole ­– linear ion-trap MS (induction voltage 4 kV; capillary voltage 40 V; tube lens voltage 100 V; capillary temperature 200 °C). Full-scan spectra were recorded in m/z range 50 – 1000, helium was used for collision-induced dissociation. 11 active compounds were identified in the extract: SS, 6 alkaloids (including cycloanthranilylproline, DHNA, hydroxy-indirubin, isatindigodiphindoside, isatindinoline A and), 3 lignans (including PR and isolariciresinol), 1 fatty acid (trihydroxy-octadecenoic acid).

Marine Drugs 19(3), 161 (2021). Samples were a standard mix (tripalmitin, palmitic acid, cholesterol, phosphatidylcholine) and lipid-enriched extracts of zebrafish larvae (Danio rerio, Cyprinidae), that were anesthetized with tricaine after having being treated with 11 extracts of cyanobacteria strains and/or with a green fluorescent lipid analogue of fatty acids (BODIPY-C16, bore-dipyrromethene derivative). HPTLC on nano silica gel in 3 steps: 1) and 2) with chloroform – methanol – water 12:6:1 (twice up to 4 cm); 3) hexane – diethyl ether – acetic acid 160:40:3 (once up to 9 cm). Derivatization of lipids by spraying primuline solution (0.01 % in acetone – water, 3:2). Quantification based on fluorescence peak area intensity, was performed using image software on pictures taken through a green fluorescence imager. Triglycerides were decreased in the case of larvae treated with 2 extracts of Synechocystis strains (Merismopediaceae), but the levels of other lipid classes were not affected. No treatment significantly affected the incorporation of BODIPY-C16 into any of the lipid classes of the larvae.

Marine Drugs 20(12), 757 (2022). Samples were ethyl acetate macerates and diethyl ether Soxhlet extracts from invasive Caulerpa cylindracea and non-invasive C. lentillifera (Caulerpaceae), as well as caulerpine (bisindole alkaloid) as standard isolated from one of the extracts. TLC on silica gel with petroleum ether – diethyl ether 1:1. Quantitative evaluation by densitometry at 330 nm, quantification of caulerpine (hRF 41, LOD 20 ng/zone, LOQ 68 ng/zone). The concentrations of caulerpine in C. cylindracea extracts (96-112 µg/g) were higher than in C. lentillifera (0-8 µg/g).

Marine Drugs 17(3), 148 (2019). Samples were ethyl acetate extracts of seagrass Amphibolis antarctica (Cymodoceaceae), and of algae: Austrophyllis harveyana (Kallymeniaceae), Carpoglossum confluens, Cystophora harveyi, C. monilifera, C. pectinata and C. subfarcinata, Myriodesma integrifolium, Sargassum lacerifolium (Sargassaceae), Codium fragile subsp. tasmanicum (Codiaceae), Ecklonia radiata (Lessoniaceae), Hypnea valida, Rhodophyllis membaneacea (Cystocloniaceae), Hormosira banksii (Hormosiraceae), Perithalia caudata (Sporochnaceae), Phyllospora comoasa, Scytothalia dorycarpa (Seirococcaceae), Plocamium dilatatum (Plocamiaceae), and epiphytic brown algae. HPTLC on silica gel (pre-washed with methanol and heated 30 min at 100 °C) with n-hexane – ethyl acetate – acetic acid 15:9:1. Derivatization by immersion: A) into anisaldehyde – sulfuric acid reagent, followed by 10 min heating at 105 °C, for the detection of steroids and terpenes; B) into DPPH• (0.2 % in methanol), followed by 30 min incubation in the dark, for the detection of antioxydants; C) into Fast Blue B solution (0.1 % in 70 % ethanol) for detection of phenols (with alkylresorcinols detected as dark purple zones on colorless background). Effect-directed analyses were performed directly on the plates. D) α-Amylase inhibition assay by immersion into enzyme solution, incubation 30 min at 37 °C, immersion into substrate solution (starch 2 % in water), incubation 20 min at 37 °C and immersion into Gram’s iodine solution for detection (inhibition zones appear blue on white background). E) Acetylcholinesterase (AChE) inhibition assay (after neutralization by immersion into phosphate buffer) by immersion into enzyme solution, incubation 30 min at 37 °C, immersion into substrate solution (α-naphthyl acetate) and into dye reagent (Fast Blue Salt B). Densitometry through automated scanning, quantification expressed as equivalents to the respective standards used for calibration curves: A) β-sitosterol (LOQ 1.6 µg/band), B) gallic acid (LOQ 60 ng/band), D) acarbose (LOQ 173 µg/band), E) donepezil (LOQ 96 µg/mL). Alkylresorcinols were detected as antioxydant in C. harveyi and C. pectinata (hRF 88), and in C. subfarcinata (hRF 72, 81, 88). Enzymatic inhibitors in C. fragile were considered as a flavone (hRF 65) and a terpenoid (hRF 77), due to their absorption curves (densitometric scan in range 200-400 nm).

J Chromatogr A, 1625, 461230 (2020). Samples were methanolic extracts of commercial supplements containing Magnolia sp. bark (Magnoliaceae), as well as honokiol (1) and magnolol (2) (biphenyl neolignans) as separated or mixed standards. TLC and HPTLC on silica gel with n-hexane – ethyl acetate – ethanol 16:3:1. Visualization under UV 254 nm. Quantification of (1) and (2) by densitometric scanning in absorbance mode at 290 nm (hRF were 34 and 39, LOQ 200 ng and 280 ng/spot, respectively). Variability between samples from the same brand supplement was also determined, as well as extraction yields. Effect-directed analysis with 3 assays: A) to detect radical scavengers, immersion into DPPH• 0.02 % solution; B) to detect activity against Gram-negative bacteria, immersion into Aliivibrio fischeri suspension, followed by recording the bioluminescence; C) to detect activity against Gram-positive bacteria, immersion into Bacillus subtilis, followed by incubation 2 h at 28 °C and immersion into MTT 1 g/L. Compounds (1) and (2) were active in all assays. Identification of zones of interest by eluting with methanol from untreated TLC layer through the oval elution head of a TLC-MS interface directly to a single Quadrupole MS (electrospray ionization, interface temperature 350°C, heat block temperature 400°C, desolvation line temperature 250°C, detector voltage 4.5kV). Full mass scan spectra were recorded in the positive and negative ionization modes in m/z range 150–800. Other molecules (from other ingredients) were identified: piperine (alkaloid) and/or its geometrical isomers (active on A, hRF 29-30); and daidzein (active on A and B, hRF 18), isoflavone from Pueraria montana root (Fabaceae). Stability was assessed through 2D-HPTLC, by repeating the same development method in the orthogonal direction 4 h or 20 h after the first separation. Degradation products of (1) and (2) appeared after 20 h (but not at 4 h), including a honokiol dimer (formed in tracks of (1) and of (2)).