« INSTRUMENTS, TOOLS AND CONCEPTS FOR HPTLC »

Product Overview

Automated Multiple Development (AMD 2)
The CAMAG Automated Multiple Development procedure allows thin-layer chromatography to be utilized for tasks that could not be performed by TLC in the past.
>> Details

Automatic Developing Chamber 2 (ADC 2)
The CAMAG Automatic Developing Chamber 2 (ADC 2) offers convenience, safety and reproducibility for isocratic developments of TLC/ HPTLC plates and foils with the format 20 x 10 cm.
>> Details

Automatic TLC Sampler 4 (ATS 4)
Automatic sample application is a key factor for productivity of the HPTLC laboratory. The ATS 4 offers fully automatic sample application for qualitative and quantitative analyses as well as for preparative separations. It is suited for routine use and high sample throughput in mass analysis.
>> Details

BioLuminizer®
The CAMAG BioLuminizer® is a detection system specifically designed to detect bioluminescence on HPTLC plates.
>> Details

Chromatogram Immersion Device
For proper execution of the dipping technique, the chromatogram must be immersed and withdrawn at a controlled uniform speed. By maintaining a well defined vertical speed and immersion time, derivatization conditions can be standardized and «tide marks», which can interfere with densitometric evaluation, are avoided.
>> Details

Derivatizer
Spraying device for the automated derivatization of TLC/HPTLC plates
>> Details

Flat Bottom Chamber
The CAMAG Flat Bottom chamber permits the chromatogram to be developed under conditions of partial or complete saturation of the tank atmosphere with solvent vapors. The degree of layer pre-saturation can not be controlled unless additional accessories are used.
>> Details

Horizontal Developing Chamber
In the CAMAG Horizontal Developing Chamber, a plate can be developed in the sandwich as well as in the tank configuration. The chamber is suitable for all kinds of solvents.
>> Details

HPTLC Vario System
Development with six different solvents can be tested side by side
>> Details

Linomat 5
With the CAMAG Linomat 5 samples are sprayed onto TLC/HPTLC plates in the form of bands with nitrogen or compressed air. Sample application is automatic, only changing the syringe (filling, inserting and rinsing) is manual. The Linomat is suitable for routine use.
>> Details

Nanomat 4 and Capillary Dispenser
The CAMAG Nanomat 4 serves for easy application of samples in the form of spots onto TLC and HPTLC layers, precisely positioned and without damage to the layer.
>> Details

Reagent Sprayer
This all glass reagent sprayer is a low cost alternative to the TLC/HPTLC Sprayer. It comes with a rubber pump but may also be operated from a compressed air or nitrogen supply.
>> Details

smartALERT Solvent Front Monitor
CAMAG smartALERT for dependable monitoring of TLC/HPTLC plate development in a glass development chamber.
>> Details

smartCUT Plate Cutter
Convenient and precise cutting of pre-coated TLC/HPTLC glass plates.
>> Details

Test Dye Mixtures
Test dye mixtures are useful for functional checks on individual steps in the TLC procedure and for studying the influence of specific parameters.
>> Details

TLC Plate Heater
The CAMAG TLC Plate Heater is designed for heating TLC plates to a selected temperature after a staining reagent has been applied.
>> Details

TLC Scanner 4
The CAMAG TLC Scanner 4 is the most advanced workstation for densitometric evaluation of TLC/HPTLC chromatograms and other planar objects.
>> Details

TLC Spray Cabinet
The CAMAG TLC Spray Cabinet ensures the complete removal of reagent mist while spraying TLC plates.
>> Details

TLC Visualizer 2
Professional imaging and documentation system for TLC/HPTLC chromatograms with a new digital CCD camera, connected by USB 3.0
>> Details

TLC/HPTLC Pre-coated plates
In most cases modern TLC utilizes precoated layers. Not only are they more convenient, their quality is superior to that of layers prepared from the type of adsorbents available for self-coating.
>> Details

TLC/HPTLC Sprayer
The TLC/HPTLC Sprayer consists of a charger and a pump unit with two kinds of spray heads. Spray head type A is for spray solutions of normal viscosity, e.g. lower alcohol solutions. Spray head type B is for liquids of higher viscosity, e.g. sulfuric acid reagents.
>> Details

TLC-MS Interface 2
The elution-based CAMAG TLC-MS Interface 2 is a highly convenient and versatile instrument allowing for rapid and contamination-free elution of TLC/HPTLC zones with online transfer to a mass spectrometer.
>> Details

Twin Trough Chambers
CAMAG Twin Trough chambers offer several ways to specifically affect the TLC/HPTLC separation in order to improve it.
>> Details

UV Cabinet 4
The UV Cabinet 4 is designed for inspecting thin-layer chromatograms or other objects under UV light in absence of ambient light.
>> Details

UV Lamp 4
The CAMAG UV Lamp 4 is designed for use in a TLC laboratory.
>> Details

visionCATS
visionCATS stands for ease of use and intuitive simplicity. The software organizes the workflow of HPTLC, controls the involved CAMAG instruments, and manages data. The easy to navigate user interface effectively guides the user through the chromatographic process – from definition of samples and substances to reporting of results.
>> Details

 
 
image image image image image image image